ROLL-BAR™ 125

The standard plate and tine windguard can be fitted with an optional roller windguard The roller windguard improves crop transfer in high volume crops and helps make the crop layers more even Feed roller has a positive influence on the baler’s overall performance

Long pick-up tine guards and two short side augers ensure a smooth, uninterrupted crop flow to the feeder

The rotor feed system guarantees even feeding performance without using knives The ingenious design not only reduces power requirement, but also ensures an equal distribution of the crop to provide an excellent bale.

When fitted with the CropCutter™, the Roll-Bar 125 can operate with up to fifteen knives engaged in the feeder system Cutting the incoming crop will increase the bale density and the silage quality For bedding applications the cut material will be more evenly distributed

The rotor lobes and knives design prevents uncut crop entering the bale chamber A “knife out” indicator warns the operator should a knife not be in the cutting position A uniform cut ensures quality silage and ease of distribution An optional hydraulic rotor reverser kit allows clearing a rotor blockage from the tractor seat

The positive start to bale formation allows the complete unrolling of the bale during bedding or feeding Chop length can be adjusted by selecting fifteen, seven or eight CropCutter™ knives Hard faced knives are available for more bales between each sharpening

Roll-Bar 125 bale chambers are completely enclosed and the gap between the tailgate and the bale chamber is minimal The large diameter stripper roller reduces crop feedback Losses are therefore reduced during formation, wrapping and ejection

The unique duckbill assembly ensures a positive start for the wrapping process Its simple construction takes net, twine or plastic film and introduces it into the bale chamber The wrapping material is then guided onto the bale surface and pulled around the finished bale as it rotates

For outside storage of straw bales Roll-Bar 125 baler can work with full width plastic film For silage baling the additional plastic layers protect the crop and can help improve silage quality

For optimum bale shape and density, even when operating in irregular windrows, the Bale Command™ Plus II monitor provides a bar graph indication of the bale chamber filling For equal filling, the operator can guide the baler according to the information displayed on the bar graph

New high quality sealed bearings are fitted to the main drive, stripper roll and rotor Dirt and dust contamination in the bearings is prevented for better durability Heavier duty chains are now used on the pick-up drive, floor roll drive and stripper roll & apron chain drive

High clutch torque setting on the main drive-line significantly reduces blockages and improves the feeding regularity Separate tensioners for the main apron chain eliminates the need to reposition the tailgate shaft The standard central oiling system also lubricates the main Roll-Bar™ apron chain